SVA AND VIN PLATE

Everything about inspection here
Post Reply
User avatar
spidermike
Posts: 64
Joined: Fri Mar 14, 2008 2:35 am
Are you a Stylus owner?: yes

SVA AND VIN PLATE

Post by spidermike »

Hi, just snt the chq and form off 2 VOSA just wanted 2 know were to put the vin plate ,
and dose the axle weights have to be on the car some place. :?:
also do i need to put engine No on plate :?: :?: put in for test on 25th april friday am
hope its a good day :roll: thanx,
D YELLO D BETTA

stylussprinter
Stylus owner
Posts: 3770
Joined: Fri Mar 10, 2006 8:49 pm
Are you a Stylus owner?: yes
Location: ASTON CLINTON BUCKS

Re: SVA AND VIN PLATE

Post by stylussprinter »

spidermike wrote:Hi, just snt the chq and form off 2 VOSA just wanted 2 know were to put the vin plate ,
and dose the axle weights have to be on the car some place. :?:
also do i need to put engine No on plate :?: :?: put in for test on 25th april friday am
hope its a good day :roll: thanx,
I put mine on alloy plate then SIKAFLEXED it to the chassis on the drivers side 25mm tube at the base of the front rocker tower. However , this was done only after the registration was done because they give you the Vin number . So it's SVA then registration. Some people , early on when P.Powell had SSC got away with using the SSC chassis number but I was told '' no way '' . The engine number will be on the block somewhere --- if a zetec , it's just above the crank sensor along the edge of the block where it joins the bellhousing. They'll want a torch and mirror to read it. You can stick your SSC chassis number wherever you like , possibly ontop the pedal box or bulkhead BUT the vin number MUST be permanently attached to the chassis.
Good luck with the SVA :wink:
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.

Schrodinger
Stylus owner
Posts: 195
Joined: Tue Aug 15, 2006 8:54 pm
Are you a Stylus owner?: yes
Location: Aviemore

Re: SVA AND VIN PLATE

Post by Schrodinger »

I understand that now you need to stamp the vin number on the chassis as well as have the vin plate attached.
Keith
Aviemore

User avatar
spidermike
Posts: 64
Joined: Fri Mar 14, 2008 2:35 am
Are you a Stylus owner?: yes

Re: SVA AND VIN PLATE

Post by spidermike »

Thanks for that guys :lol:
Zetec will b along after sva .but 4 now it crossflow :shock:
i under stand that i need leta from fords to confrm the year of manufacture for the crossflow
ive got the engine number dates it to as 1972.any one have the address or contact details for ford.

:P thanks Mike
D YELLO D BETTA

User avatar
kevp
Stylus owner
Posts: 410
Joined: Thu Mar 09, 2006 11:21 pm
Location: Southampton

Re: SVA AND VIN PLATE

Post by kevp »

Mike

The address & fax for Fords has been posted on the site. Do a search.

Technical Information Centre
Ford Motor Company
PO Box 300
Walsall
WS5 4QH

Fax: 01922 725 266

stylussprinter
Stylus owner
Posts: 3770
Joined: Fri Mar 10, 2006 8:49 pm
Are you a Stylus owner?: yes
Location: ASTON CLINTON BUCKS

Re: SVA AND VIN PLATE

Post by stylussprinter »

What's the beastie in your Stylus ' PIC ' Kevin :?:
I just love the Stylus but she keeps swallowing £££ !
Alfa Red 159 2.4 jtdm ti 260bhp 365lbft / BilsteinB12 + Adjustable Powerflex camber/castor bushes. Red STYLUS 2lt zetec 231bhp 185lbft Dunnell . RED 1972 Alfa 2lt GTAm replica 170bhp.

User avatar
spidermike
Posts: 64
Joined: Fri Mar 14, 2008 2:35 am
Are you a Stylus owner?: yes

Re: SVA AND VIN PLATE

Post by spidermike »

thanks 4 that Kevp.. :mrgreen:

As you put it Kevin ...the beastie is just a 1700ish crossflow lump with twin 40s
pushed along by steam :lol: WHen sva has past i will be lookin for a Zetec but for now :(
Attachments
IMAG0053-400.jpg
IMAG0052-400.jpg
D YELLO D BETTA

Post Reply